2. Virtualization
Make Sure To Read The Full Guide This page explains how to enable virtualization in bios
Type "Task Manager" in the Windows search bar and open it.
In Task Manager, go to the "Performance" tab.
Under the "Performance" tab, select "CPU" from the list on the left.
Look for a section labeled "Virtualization" or "Virtualization enabled" in the CPU information.
If virtualization is enabled, you're good to go. You can skip any further steps. However, if it's disabled or not mentioned, you'll need to enable it. Here's a general guide to enable virtualization in BIOS:
Restart your computer.
While your computer is starting up, repeatedly press the BIOS key. The BIOS key is usually displayed on the screen during startup and commonly is one of the keys like F2, F10, Del, or Esc.
Once you're in the BIOS settings, navigate to the "Advanced" or "CPU Configuration" section using the arrow keys.
Look for an option related to "Virtualization Technology," "Intel VT-x," or "AMD-V" depending on your processor type. It may be located under different sub-menus depending on your BIOS version and manufacturer.
Enable the virtualization option by selecting it and pressing Enter, then choosing "Enabled."
Save the changes and exit the BIOS settings. Usually, you can do this by pressing the F10 key and confirming with "Yes."
After enabling virtualization in BIOS, restart your computer for the changes to take effect. Then, go back to Task Manager and check if virtualization is now enabled. If it is, you're all set. If not, you might need to consult your computer's documentation or manufacturer's website for specific instructions related to your hardware.
Copyright © 2022-2024 Midnight Vision
Last updated